General Functions Shutdown state:

When the grid is connected, the module stays in standby mode with only minimum standby power consumption. When the grid is disconnected, the module shuts down completely with zero power consumption. Sleep state: The module operates in sleep mode with only minimum standby power consumption. Automatic operation mode: Supports automatic charge and discharge, with mains supply priority. During charging, if the bypass is loaded, bypass power takes priority and charging power decreases as bypass power rises. If there is no bypass load, full power is used to charge the battery. During discharge, the power module disconnects from the grid side and supplies power to the load via the bypass. When mains power is restored, the bypass automatically switches to mains supply and the module enters charging mode simultaneously.

Function Modules / Category / Description

Inverter

Output Power: 1200VA

Battery Input: 20~29.4Vdc

Inverter Output Voltage: 90~140Vac, typical 120Vac

Output Frequency: 60Hz

Output Waveform: Pure Sine Wave

Efficiency: Peak Efficiency ≥90%

AC-DC

Charging Power: 1200W

AC Input: 90~130Vac

AC Input Frequency Range: 47~63Hz

PF: 0.99 @100% Load

Charging Voltage: 29.4V

Charging Current: 40A

Efficiency: Peak Efficiency ≥91%

our casey

Lorem ipsum dolor sit amet consectetur adipisicing elit.

Product Features

1200W Integrated Power Inverter

1200W Integrated Power Inverter Fan control: The fan stops rotating when the NTC temperature is below 40°C and the inverter has no power output. When power transfer is detected, the fan speed is maintained at 30%. When the NTC temperature rises to 40°C, the fan speed increases to 80%. When the NTC temperature rises to 60°C, the fan speed increases to 100%.