UY300LP Series:
This series uses the same CCM PFC + LLC circuit as the L series, and has the same advantages as the L series.
1. At the same time, the whole machine is sealed with a potting process, and the case is filled with thermally conductive silicone, so the whole machine can reach IP65 protection level, which is suitable for more environments.
2. No cooling fan is used, making the unit quiet and noiseless during operation.
3. The 300LP and 360LP have full certification.
UY300LP waterproof charger 14.6v 15a Lifepo4 Battery Charger Ip65
Charger working instructions
During the charging process, the charger will monitor the current temperature in real time. When the temperature exceeds 75°C, the maximum output ampere will be limited to 80%, and when the temperature drops below 75°C, the maximum output ampere will be restored. The temperature still rises when limited to 80% of the output ampere. When the temperature reaches 80℃, the maximum output ampere reaches 60%, and the output ampere gradually recovers after the temperature drops. If the temperature of the charger is still rising, when the temperature reaches 85°C, the charger will trigger overheating protection. There is no output after overheating protection, and the charger will resume work when the temperature drops below 75°C.
Protect Characteristics
1: Output Over Voltage Protection
When the charger output voltage exceeds the maximum charging voltage, the charger enters the standby state protection. It will restore to normal working condition automatically after troubleshooting.
2: Output Over Current Protection
When the charger output current exceeds the maximum charging current, the charger enters the over current protection status, the charge voltage approaches 0V. It will restore to normal working condition automatically after troubleshooting.
3: Short Circuit Protection
4: Reverse Polarity Protection
5: Over Temperature Protection
FAQ
Q1: Will each of your products be tested before shipment?
Answer: Yes, each of our battery chargers will undergo rigorous testing before shipment. The steps of the test are: initial test---aging test---high voltage test---calibration voltage and current test---AET test---sampling test.
Q2: What kind of battery chargers can you provide?
A: We can produce lithium battery chargers, lead-acid battery chargers, and LifePo4 battery chargers in the range of 60w-2500w.
Q3. Do you have any new products coming?
A: We have a company with 15 years of experience in the production of chargers. At present, our main goal is the design and production of high-power chargers. 360W and 300W battery chargers have applied for certification and are now in mass production.
UY300LP Series:
This series uses the same CCM PFC + LLC circuit as the L series, and has the same advantages as the L series.
1. At the same time, the whole machine is sealed with a potting process, and the case is filled with thermally conductive silicone, so the whole machine can reach IP65 protection level, which is suitable for more environments.
2. No cooling fan is used, making the unit quiet and noiseless during operation.
3. The 300LP and 360LP have full certification.
Hot Tags: 14.6v 15a lifepo4 battery charger ip65, China, suppliers, manufacturers, factory, custom, wholesale, lithium iron phosphate battery charger, lifepo4 battery telecom charger, lifepo4 battery solar charger, lifepo4 battery mobile charger, 12V Smart Lifepo4 Battery Charger, video store lifepo4 battery charger