If you want to maintain the battery, it is necessary to learn several charging methods, which will help to prolong the life of your battery;
Correct charging sequence: “Plug the battery first, then the power supply” when charging, and “pull out the battery end first, then the power supply end” when unplugging.
The specifications of lithium ion phosphate battery charger UY900 model
| Specification | Li-ion | Lifepo4 | Lead acid | Charging current |
| 12V 40A | 12.6V/16.8V | 14.6V | 14.7V | 40A |
| 24V 28A | 25.2V/29.4V/ 33.6V | 29.2V | 29.4V | 28A |
| 36V 18A | 42V/46.2V | 43.8V | 44.1V | 18A |
| 48V 15A | 50.4V/54.6V/58.8V | 54.75V/58.4V | 58.8V | 15A |
| 60V 12A | 63V/67.2V/71.4V | 73V | 73.5V | 12A |
| 72V 10A | 79.8V/84V | 87.6V | 88.2V | 10A |
900W
Aluminum case
Circuit topology: Current Half-bridge type
MCU and intelligent PWM IC control ,full automatic transition of CC,CV and Float/Cut-off, meet the demands for different Curve
Protections: Over Current, Over Voltage, Over temperature, Short Circuit, Reverse Polarity, shut off or trickle and anti-reverse charge Voltage & Current LED meter display (optional)
Intelligent cooling fan, controlled by temperature
The Lithium Ion Phosphate Battery Charger is a static converter device that uses power electronic semiconductor devices to convert alternating current with constant voltage and frequency into direct current.
The composition of the charger
1. Shell
2. Input line, output line
3. Circuit boards, heat sinks, various electronic components (capacitors, resistors, microcontrollers, optocouplers, MOS tubes, diodes, triodes, switch tubes)
UY900 charger adopts a more scientific method, which is to choose a charger that automatically powers off. Now the new national standard chargers basically have such a function. It can monitor whether the capacity of the battery has reached the maximum value, so as to judge whether the charger is not. It will stop continuing to "float charging". This power-off function is very good to avoid the damage to the battery caused by "overcharging" caused by unplugging before the car is fully charged and charging for too long.
FAQ
1: Do you have your own factory or just a distributor?
A: We have factory, our factory is located in Renhe, Guangzhou. It is near the Baiyun Airport.
2: How many years of warranty of your chargers?
A: They are with 12 months warranty.
3: How do you send the products?Via express or sea?
A: There are expresses, such as DHL, UPS, FedEx and TNT, Airline and sea shipment are also available.
4: How many employees in your company?
A: The are 56 employees in our company.
The Yunyang charger adopts an aluminum box with a gold casing, which has a good heat dissipation effect. And with over voltage protection, over current protection, short circuit protection, reverse polarity protection and over temperature protection. When the charger is in a faulty state, the charger stops charging and restarts charging only after the charger is cleared of the fault.
Hot Tags: lithium ion phosphate battery charger, China, suppliers, manufacturers, factory, custom, wholesale, pet store lifepo4 battery charger, commercial lifepo4 battery charger, workshop lifepo4 battery charger, agricultural lifepo4 battery charger, lifepo4 battery performance charger, wall mounted lifepo4 battery charger