News

UY600L Robot Charger

Nov 13, 2026 Leave a message

our product
 

Battery charger for robot

robot charger

Robot charger specification

UY600L charger is compatible with NCM lithium batteries, LiFePO4 batteries and lead‑acid batteries. They cover the commonly used 12 V to 72 V battery pack voltage ranges for humanoid robot projects, meeting the energy replenishment requirements of robots with different dead weights and endurance configurations.

Robot charger specification

The unit delivers a maximum total power of 600 W with an aluminum alloy housing. Its dimensions are 210 × 120 × 70 mm. Featuring a compact structure, it is easy to embed into charging docks or placed standalone at laboratory workstations. The AC input accepts a wide voltage range of 80–265 VAC at 47–63 Hz, with automatic adaptation to power grids worldwide. It can be deployed directly for domestic factories as well as overseas demonstration projects.

robot charger
robot charger

Robot Charger Specification

Charging profiles available: 12 V 30 A, 24 V 20 A, 36 V 10 / 15 A, 48 V 10 A, 60 V 8 A, 72 V 7 A. It adopts an APFC + LLC resonant half‑bridge topology for the hardware architecture, with a typical overall efficiency of 92%. The MCU main controller implements a four‑stage smart charging profile: pre‑charge, constant current, constant voltage and float charge.

Robot Charger Specification

It softens the inrush current at power‑on to protect the costly power batteries of robots. Thermal design: variable‑speed fan controlled by a dual closed loop of temperature and load current. Noise ≤ 40 dB for quiet operation, suitable for low‑noise environments such as exhibition halls and laboratories.

robot charger

 

 

Send Inquiry