News

UY900L Robot Charger

Nov 13, 2026 Leave a message

that's our productions

 

UY900L Robot charger
01

UY900L Robot charger

Total output power: 900 W, single-channel output; max input power 979 W. It is ideal for mass-production workstations of humanoid robots with high-frequency operation and fast energy replenishment requirements. Auto wide AC input: 80–265 VAC, compatible with 50 / 60 Hz. Leakage current < 0.75 mA for enhanced safety margin. Available charging profiles: 12 V 40 A, 24 V 30 A, 36 V 20 A, 48 V 15 A, 60 V 12 A, 72 V 10 A, delivering stronger high-current fast-charging capability.

02

UY900L Robot charger

It adopts resonant LLC half-bridge topology plus PWM pulse-width modulation. The power factor reaches up to 0.99 with typical efficiency ≥ 92%, offering energy saving and stable output. Built-in battery pre-charge logic works seamlessly with the robot's BMS pre-charge routine to reduce inrush current upon power-up and protect the robot's electronic control system and battery pack.

UY900L Robot charger
UY900L Robot charger
03

CAN / RS485 communication is supported to realize closed-loop management of the humanoid robot energy system.

Unlike ordinary AGVs and small mobile robots, the energy management system of humanoid robots requires bidirectional real‑time communication between the charger and the battery BMS - this is the core advantage of the UY600L and UY900L. Both models are available with optional CAN or RS485 communication interfaces.

04

CAN / RS485 communication is supported to realize closed-loop management of the humanoid robot energy system.

Real‑time acquisition of battery pack data: read SOC, cell voltages, battery temperature and fault alarm signals. Receive commands from the BMS: remote start / stop of charging, dynamic limiting of charging current and voltage; the charging logic is master‑controlled by the battery BMS. Charging data can be uploaded to the workstation host computer, with automatic log storage and anomaly alerts for convenient bulk operation and maintenance of multiple robots. Custom communication protocols are supported for direct integration with in‑house developed BMS from humanoid robot manufacturers. No extra adapter modules are required, lowering system integration effort and shortening project development cycles.

UY900L Robot charger

 

 

Send Inquiry