The main function
1) Main functions of high-power charger IBCE-2212
1. Adopt the charging mode of "constant current-constant voltage limit current-constant voltage floating charge", which requires a fully automatic working state, which is suitable for unattended working occasions.
2. The built-in memory can store at least ten groups of charging data.
3. The device has a USB interface, which is convenient for importing data to a computer for viewing.
4. The device is equipped with background analysis software to view and analyze the entire set of charging curves.
5. It has simple operation, fast charging speed, high charging recovery efficiency, and no danger of overcharging after charging.
6. Voltage/current data display, with functions such as overvoltage, undervoltage, overcurrent, output short circuit, anti-reverse connection protection and overheating protection.
7. It adopts bandwidth modulation technology, high efficiency, high power factor, low noise, low electromagnetic interference, and can be used in electric equipment rooms.
8. The host is equipped with wheels, which is convenient for movement and transportation, and meets the charging requirements of different computer rooms.
9. The charging output current is continuously adjustable from 1-120A, and the digital panel input.
10. The charging output voltage is continuously adjustable from 30-300V, digital panel input.
Instructions for use
1. Unpacking: When unpacking, check the accessories that come with the box.
2. Check before power-on: Check the damaged condition during transportation such as whether the screws are loose, whether the appearance is abnormal, whether it is damp, etc. before powering on the high-power charger stored and transported. If the above phenomenon occurs, it should be handled promptly.
3. Wiring: Add an air switch to the input end of the high-power charger to control the power input, connect the safety ground wire and the input power wire according to the logo on the rear baffle, and confirm that the connection is correct and the connection is strong. Whether the voltage of the connected input power supply is consistent with the nominal voltage in the manual.
4. When the cooling fan is temperature controlled, when the temperature inside the machine exceeds the starting temperature control point of the fan, the fan inside the machine can be started. The speed of the fan varies with the output voltage and current. It is normal. Condition: Please do not block the air inlet and outlet of the fan during operation.
5. When the temperature inside the machine is too high to reach the overheating shutdown temperature threshold, the machine will actively stop working to ensure that it is not damaged; when the temperature drops slightly, it will automatically start to resume work.
6. When the high-power charger is in use, the dust, acid, corrosive gas or substance in the air should not exceed the normal content, and there should be no violent sensation, turbulence, rain, and try to prevent direct sunlight.