The high efficiency and low energy consumption of electric forklifts bring a lot of convenience to our daily lives, especially in the storage and transportation industry. Protecting forklift batteries and prolonging the service life of the batteries are particularly critical. Therefore, consumers should pay attention to choosing cost-effective chargers and using them correctly.
The main steps of using a charger to charge an electric forklift are as follows:
1. The power cord of the charger should be connected to the mains power supply first, and it needs to be connected to the AC11V or AC220V power supply according to the marking of the charger of the electric forklift;
2. Then connect the charger and battery cable well;
3. Open the dust cover of the battery of the electric forklift, which is more advantageous when the electric forklift has a good heat dissipation effect when charging;
4. At this time, you can turn on the start switch of the charger to charge.
5. After the battery is fully charged, turn off the switch button of the charger, unplug the battery connector and power plug of the electric forklift, and carefully check whether the electrolyte of the vehicle battery is within the normal range. Enough, then you need to add distilled water immediately to make it reach a normal use level.